5052 Aluminum Coil and Strip
5052 aluminum alloy belongs to the Al-Mg series alloy and is widely used. Especially in the construction industry, this alloy is inseparable and is one of the most promising alloys. It has good corrosion resistance, excellent weldability, good cold workability, and has medium strength.
Email: export@xienuoenterprise.com
5052 Aluminum Coil and Strip
5052 aluminum alloy belongs to the Al-Mg series alloy and is widely used. Especially in the construction industry, this alloy is inseparable and is one of the most promising alloys. It has good corrosion resistance, excellent weldability, good cold workability, and has medium strength.
5052 Aluminum Coil DC / CC Alloy designation (For Reference)
Comparison of Alloy Designations for 5052 aluminum sheet coil.
| Alloy Series | Chinese Standard | American Standard | European Standard |
| 5xxx Series | 5052 | 5052 | EN AW-5052 |
5052 Aluminum Coil DC / CC Chemical Compositing
Chemical Composition conforms to Chinese, American and European standard specification (For Reference)
| Alloy | Si | Fe | Cu | Mn | Mg | Zn | Cr | Others:Each |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.10 | 0.15-0.35 | 0.05 |
Product Videos
Mechanical properties of 5052 aluminum coil
| Tensile strength σb (MPa) | 173～244 |
| Conditional yield strength σ0.2 (MPa) | ≥70 |
| Specimen dimensions | all wall thicknesses |
| Note | Longitudinal mechanical properties of pipes at room temperature |
5052 Aluminum Coil DC / CC Temper designation (For Reference)
| Temper | Definition |
| O | Annealed |
| H12 | Strain Hardened, 1/4 Hard |
| H14 | Strain Hardened, 1/2 Hard |
| H16 | Strain Hardened, 3/4 Hard |
| H18 | Strain Hardened, Full Hard |
| H22 | Strain Hardened and Partially Annealed, 1/4 Hard |
| H24 | Strain Hardened and Partially Annealed, 1/2 Hard |
| H26 | Strain Hardened and Partially Annealed, 3/4 Hard |
| H28 | Strain Hardened and Partially Annealed, Full Hard |
5052Aluminum Coil DC / CC Available Size Range
| Alloy | 5052 |
| Temper | O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
| Thickness（mm） | 0.2-8.0mm |
| Width（mm） | 20-2650mm |
| Standards | GB, EN, ASTM, AISI, JIS, DIN. |
| Surface Treatment | Anodizing, Color coating, Embossing, Lamination, Polishing etc. |
| Packaging | Standard export wooden box/pallet packaging, suitable for sea transportation |
Characteristics of 5052 aluminum coil
1. Forming performance
a. The alloy has good plasticity during hot processing. The forging and die forging temperature is 420~475°C, and thermal deformation with a deformation rate of >80% is performed within this temperature range.
b. The cold stamping performance is related to the alloy state. The cold stamping performance in the annealed (O) state is good, followed by the H32 and H34 states, and the H36/H38 state is not good.
2. Welding performance
This alloy has good performance in gas welding, arc welding, resistance welding, spot welding and seam welding, but has a tendency of crystallization cracks during TIG welding.
The cutting performance of this alloy is not good in the annealed state, but is improved in the cold work hardened state.
Application of 5052 aluminum coil
5052 alloy aluminum coil belongs to the Al-Mg series alloy. It has good corrosion resistance, excellent weldability, good cold workability, medium strength, high plasticity and corrosion resistance, good corrosion resistance, good weldability, and medium strength.
5052 aluminum alloy is used to manufacture aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, instruments, street lamp brackets and rivets, hardware products, electrical appliance casings, etc.
Have Any Question?
Please Leave your message you want to know! We will respond to your inquiry within 24 hours!
